BWCMN - 4600 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)
- MSDS: BWCMN
- Manufacturer: JV MANUFACTURING CO INC
- Product Name: 4600 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)
- National Stock Number: 7930-00N055561
Product Identification
Product ID:4600 SERIES, SPILFYTER FOR HAZARDOUS (SUPDAT)
MSDS Date:07/01/1993
FSC:7930
NIIN:00N055561
MSDS Number: BWCMN
Responsible Party
GREEN BAY, WI 54304
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 800-334-9092
Cage: IO899
Contractor
Telephone: 800-334-9092
Cage: IO899
Ingredients
CARBON; (CARBON BLACK) (ACTIVATED CARBON)
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: >90%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 RDUST
>570F,>299C. SOL IN
Fraction By Weight: <10%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:MAY CAUSE IRRITATION.
EXPERIENCED AS MILD DISCOMFORT & SEEN AS SLIGHT REDNESS OF EYE.
SKIN:MAY CAUSE IRRITATION. INHALATION:EXPOSURE TO DUST LEVELS
EXCEEDING THE PEL MAY CAUSE IRRITATION OF UPPER RESPIRATORY
SYSTEM. SIGNS & SYMPTOMS OF OVEREXP:INHAL:DRY COUGH.
CHRONIC:INHALATION:(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:EXPOSURE TO CARBON DUST MAY LEAD TO
THE DEVELOPMENT OF RESPIRATORY PROBLEMS. PERSISTENT DRY COUGH AND
LABORED BREATHING EXERTION ARE SYMPTOMATIC.
Medical Cond Aggravated by Exposure:REPEATED SKIN CONT MAY AGGRAVATE AN
EXISTING DERMATITIS (SKIN CONDITION) AND/OR SENSITIVITY OF THE
SKIN. BREATHING OF DUST MAY AGGRAVATE ACUTE/CHRONIC ASTHMA & OTHER
CHRONIC PULMONARY DISEASE.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . EYES:IMMED FLUSH W/PLENTY OF
WATER FOR @ LEAST 15 MINS. HOLD EYELIDS APART WHILE FLUSHING TO
RINSE ENTIRE SURF OF EYE & LIDS W/WATER. SEEK MED ATTN. SKIN:REMOVE
CONT AMD CLTHG. BRUSH OFF EXCESS POWDER W/DRY TOWEL. WASH EFFECTED
AREA W/PLENT OF SOAP & WATER FOR SEVERAL MINS. SEEK MED ATTN IF
IRRIT DEVELOPS/PERSISTS. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG,
(SUPDAT)
Fire Fighting
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, FOAM & CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION, TOXIC FUMES
OF CARBON MONOXIDE (CO) AND CARBON DIOXIDE (CO*2) ARE EMITTED.
Accidental Release
Spill Release Procedures:AVOID BRTHG DUST. CONTAIN LEAKING/SPILLED
MATL. CLEAN-UP USING SHOVELS, SWEEPING/VACUUM SPILLED MATL TO AVOID
GENERATING AIRBORNE DUST. ALL SPILLS SHOULD BE HNDLD ACCORDING TO
PREDETERM PLAN I/A/W 29 CFR 1910.120-HAZ WASTE OPERATIONS & EMER
RESPONSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, AND WELL
VENTILATED AREA. CLEAN-UP SPILLS PROMPTLY TO AVOID MAKING DUST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF DUST IS GENERATED USE NIOSH/MSHA APPRVD AIR
PURIFYING RESP W/APPROP FILTER FOR CARBON (ACTIVATED) FOR
MAINTAINING AIRBORNE DUST LEV EXCEED PEL'S & TLV'S. NIOSH/MSHA SCBA
SHOULD BE USED FOR LARGE SC ALE APPLICATIONS. ANY RESPS (SUPDAT)
Ventilation:LOCAL EXHAUST & MECHANICAL (GENERAL):AS APPROPRIATE.
Protective Gloves:CHEM RESIST GLOVES.
Eye Protection:ANSI Z87.1-1989 APPRVD CHEM GOGGLES.
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEETS
ANSI DESIGNCRITERIA . HAVE OXYGEN READILY AVAILABLE.
Work Hygienic Practices:DO NOT BREATH DUST. DO NOT GET IN EYES.
Supplemental Safety and Health
MFG TRADE NAME/PART NO:MATERIALS-VAPOR SUPPRESSOR. MATLS TO
AVOID:GASES. AVOID CONT W/HIGH CONC OF KETONES IN AIR. FIRST AIR
PROC: GIVE ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYG. SEEK MED ATTN.
RESP PRO T:WORN IN CONJUCTION W/THIS PROD SHOULDBE WORN I/A/W 29
CFR 1910.134 - RESP PROTECTION.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:SEE ING
Melt/Freeze Pt:M.P/F.P Text:SEE ING
Spec Gravity:0.62000
Solubility in Water:SEE INGREDIENT
Appearance and Odor:BLACK IRREGULAR DRY CRYSTALLINE POWDER, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS & POWDERED ALUMINUM. CONT W/AMMONIUM & AMMONIA
CONTAINING CMPDS WILL CAUSE GENERATION OF (SUPDAT)
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CHLORINE GAS.
Disposal
Waste Disposal Methods:DISPOSE OF ORIGINAL (VIRGIN) MATL I/A/W FED, ST,
& LOC REGS. ONCE PROD SORBS CHEM THIS PROD THEN TAKES ON
CHARACTERISTICS OF CHEM SORBED & SHOULD BE DISPOSED OF I/A/W ALL
FEDERAL, STATE, AND LOCAL REG S FOR THE CHEMICAL SORBED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.